好吧，我希望您已经构建并完成了您的项目。
All right I hope you've got your project built and done.

我将继续并开始加载所有内容，以便我可以构建自己的。
I'm going to go ahead and start getting everything loaded up so that I can build my own.

所以现在让我在 IRS 链接中进行模拟，Arrius 逻辑已全部启动并准备好直接投入到这件事中，使其快速、完善并使其看起来还算不错，甚至希望对操作员有点用处。
So right now let me just get emulate in IRS links and Arrius logic's all started up and ready to dive right into this thing in make it quick with make it good and make it look halfway decent and hopefully even be a little bit useful to the operator.

因此，让我们继续上网，将其置于运行模式。
So let's go ahead and go online put this thing into run modes.

让我们打开这个东西，我将关闭我的输出，这样我就不必查看它了。
Let's get this thing open and I'm going to close my outputs so I don't have to look at that.

现在我的表单就在我面前，我将拖动屏幕的底角，并将其放大一点。
And now I've just got my form in front of me where I'm going to drag this bottom corner of my screen and I'm going to make it a little bit bigger.

我想知道你是否知道你可以做到这一点。
I wonder if you knew you could do that.

如果不是，你现在可能会踢我，说不公平，你使用的空间比我以前多了。
If not you're probably kicking me right now saying no fair man you're using a lot more space than I used to.

没关系。
That's OK.

我有点像个骗子。
I'm kind of a cheat.

因此，让我们继续删除这些说明并删除此徽标。
So let's go ahead and get rid of those instructions and get rid of this logo.

我不需要在屏幕上显示任何这些东西，因为我认为我们已经确定我们正在使用非常有限的空间。
I don't need any of that stuff on my screen because I think we've already established that we're working with very limited space.

所以我要做的第一件事是我知道我必须拥有一件事，我必须有我的警报，所以我将首先显示一些警报。
So first thing I'm going to do is I know there's one thing I have to have I have to have my alarms so I'm going to start by displaying some alarms.

我想做的第一件事是在杂项下我有一个写着大图例板的东西。
The first thing I want to do is under miscellaneous I've got this thing that says legend plate large.

因此，我将把图例板改小，以便立即使这件事更易于管理。
So I'm going to change that legend plate to small so that right away made this thing a little bit more manageable.

你说嘿等等，你没有告诉我们你没有教我们如何做到这一点。
And you're saying hey wait you didn't show us that you didn't teach us how to do that.

你知道吗。
You know what.

没关系。
That's OK.

我只是在这里闲逛才了解到这一点。
I learned that by just poking around in here.

这就是你必须做的。
And that's kind of what you have to do.

所以你必须研究其中的一些控件。
So you have to poke around with some of these controls.

这实际上是您在我的开发中学习有关 h 的任何信息的唯一方法，因为您可以设置和更改太多不同的属性和事物来完成一门课程并教授所有这些属性和事物。
And that's really the only way you're going to learn anything about h in my development because there are way way way too many different properties and things that you can set and change to go through one course and teach all of them.

所以这是我稍微作弊的一件事，我把它做得小一点，我将复制它，然后我将再创建三个。
So that's one thing I cheated a little bit and I made this a little smaller and I'm going to copy this and I'm going to create three more of them.

所以我将再次点击 Control C Control V control V control V，我将设置这些东西，实际上你知道我将把这些东西设置为一个堆栈。
So I'm just going to hit Control C Control V control V control V again and I'm going to set these things up actually you know what I'm going to set these things up as a stack.

因此，让我们像这样将它们放在一起，然后将其移至屏幕的右上角。
So let's just put them together like so and I'm going to move this up to the top right of my screen.

还有这些是什么。
And what are these.

好吧，这些将是我的手臂。
Well these are going to be my arms.

那么，让我们从改变这些内容开始吧。
So let's start off by changing what these things say.

所以这将是 L-L 级，而这个将把文本更改为 H.H. 级。
So this is going to be level L-L and this one will change the text to say level H.H..

然后这个就会有压力。
And then this one will be pressure.

我就称其为公关吧。
I'll just call it PR.

是的。
Yes.

点H.H..
Dot H.H..

所以这将是我的高压。
So that's going to be my high pressure.

然后这一个将是我的点流。
And then this one will be my l o dot f l o w.

好的，现在我有了四个警报的指示。
OK so now I have indications from my four alarms.

这些指示器的颜色又如何呢？
And what about the colors of these indicators.

好吧，现在我想我已经将那些设置为绿色，我真的更喜欢那些设置为红色。
All right now I think I've got those set up is green and I really rather those be red.

因此，我将详细介绍并将所有四个指示器设置为红色指示器，因为通常人们认为红色是坏的，而他们认为绿色是好的。
So I'm going to go through and I'm going to set all four of these to be red indicators because generally people see red as bad and they see green is good.

好吧，当我出现警报并且我的系统即将爆炸时，我不想将它们显示为绿色。
Well I don't want to show them green when I have an alarm condition and my system is about to explode.

所以我认为红色可能会更合适，我会保留这种颜色。
So I think probably red will be a lot more appropriate and I'll leave the color off.

让它是白色的，这样当我没有闹钟时它们就会像这样。
Let it be white so they'll look just like this when I don't have an alarm.

然后，当我确实有警报时，它们应该发出红光，然后就像我从警报中获得指示器一样，​​我也需要在其中放置一些重置按钮。
And then they should glow red when I do have an alarm and then just like I've got my indicators from my alarms I'm also going to need to put some reset buttons in there.

因此，让我们继续吧，我认为我不会将这种类型的按钮用于我的警报控制，因为它看起来确实像电动机控制或其他东西。
So let's go ahead and I don't think I'm going to use this style of button for my alarm controls because that really looks like electrical motor controls or something.

对于控制警报来说，这有点太工业化了，所以让我们回到这里。
And that's a little too industrial looking for controlling alarms so let's come back in here.

我将把我的基本按钮放到这里。
And I am just going to take my basic button and bring that down here.

所以我想稍微设计一下这个按钮的样式。
So I'm want to style this button a little bit.

让我们来到这里，我要改变的第一件事是我的平面风格，我要继续，你会看到我有标准，然后我也有弹出，这很好，但我想我'我要继续并选择公寓。
Let's come in here and the first thing I'm going to change is my flat style and I'm going to go ahead and you see I've got standard then I've also got pop up and that's nice but I think I'm going to go ahead and go with flat.

所以我要在这里创建一个漂亮的扁平小按钮，然后将其带到这里，然后调整它的大小。
So I'm just going to create a nice flat little button here and let me bring that over here and I'm going to resize it.

所以它的宽度与我的指示器大致相同。
So it's about the same width as my indicators.

我只是要把它弄高一点。
And I'm just going to make it a little bit taller.

现在对于字体，我也将继续更改其颜色。
And now for the font I'm going to go ahead and change the color of that as well.

所以让我们继续把它变成漂亮的红色。
So let's go ahead and make this a nice red.

这对我来说看起来不错。
That looks good to me.

我将把这段文字设置为沉默，希望这很适合。
That text I'm going to set this up as a silence and hopefully that fits good.

然后我将复制并再创建一个，并将其放在下面，我将更改其中的文本，说“重置非常好”。
And then I'm going to copy and I'm going to create one more of these and I'm going to put it right below there and I'm going to change the text of that to say reset very good.

然后我真的不喜欢它们离我的按钮太近，所以我要选择这两个按钮，然后将它们向下拖动并创建一点间隙。
And then I really don't like these being so close to my buttons so I'm going to select these both and I'm going to drag them down and just create a little bit of gap.

所以现在我已经设置好了警报并准备好至少在视觉上进行管理。
So now I've got my alarms all set up and ready to manage at least visually.

但实际上我需要为所有这些输入正确的地址。
But then I actually need to put in the correct addresses for all of these.

因此，让我们来这里查看属性，我需要为每个属性设置正确的值。
So let's come down here to see properties and I need to set the correct values on each of these.

那么让我们继续看看我的闹钟响了，我正在寻找我的通知位。
So let's go ahead and jump in to my alarms rang and I'm looking for my notification bits.

所以我首先要承受的高压是八人的 B-3。
So I've got first of all my high pressure that's a B-3 for eight.

所以这是我的压力很高。
So here's my pressure high high.

现在向下滚动到这里，我将其设置为三比八。
Now scroll down here and I'll set that to be three for eight.

好的。
All right.

所以我有我的压力。
So I've got my pressure.

让我们看看我的下一个警报是什么，我的低流量是 10 次的 B-3。
Let's see what my next alarm is that's going to be my low flow is B-3 for 10.

那么让我们重新开始吧。
So let's jump back in.

这是我的低流量，我们将其设置为 10 个中的 3 个。
Here's my low flow and we're going to set that to be three for 10.

我的下一个警报是什么，这将是我的水箱低低，B-3 表示 12 如此低水平低低，我们将其设置为 B-3 表示煤炭和 12。
And what's my next alarm that's going to be my tank low low and that's B-3 for 12 so low level low low and we'll set that to be B-3 for coal and 12.

这给我们留下了很高的水箱液位。
And that leaves us with our high high tank level.

这就是 14 的 B-3，我们将在这里进行更改。
And that is B-3 for 14 and we'll just make that change right here.

B-3 为 14。
B-3 for 14.

然后我们的警报静音和重置警报静音怎么样，是 B-3 310。
And then what about our alarms silence and reset alarms silence is B-3 310.

所以我们刚刚说过，这也是 PRC 地址 B-3 冒号 3 斜杠 10。
So we just said that as well that's PRC address B-3 colon three slash 10.

我们知道我们需要将值 1 写入该地址才能使其工作。
And we know that we need to write a value of 1 into that address for it to work.

好的，我们找到了 B-3 310。
All right so we've got B-3 310.

然后为了复位，我们还将写入 1，该地址是 B-3 3 9。
And then for reset we're also going to be writing a 1 and that address is B-3 3 9.

因此，让我们继续在 PRCA 地址下输入三和三斜杠九。
So let's go ahead and type that be three and three slash nine under PRCA address.

点击。
Click.

就这样，我相信我的闹钟已经响了。
And just like that I believe my alarms are done.

好的。
All right.

让我们在这一点上休息一下，只是为了让这些讲座易于管理，我们将再次跳回到我们上次停下的地方并进行下一个讲座。
Let's break at this point just to keep these lectures a little bit manageable and we will jump back again right where we left off and the next one.

那么到时候见。
So see you then.

干杯。
Cheers.